Stock Request
*
Quantity Required:
Article Number:
*
E-mail Address:

Can't find a product?
*
Just ask:
*
Contact email:

Recently Viewed

Gebo - Econoline portlights

Gebo

Those familiar with Gebo Standard and the (discontinued) FlushLine portlights will recognise immediately the same qualities in the EconoLine range.  The same high quality, non-corrosive materials.  The same meticulous attention to detail.  The same easy-installation design.

Price:  £245.00
RRP:  £287.00
Save:  £42.00 (15%)
(Inc. VAT @ 20%)
+
Port size:  
Fixed/Opening:  

Article Number:  81.71.00.05


More quality for your money
Compare a Gebo EconoLine portlight to other commonly specified portlights of a similar price, and you'll notice distinct differences.  For example, the EconoLine portlight lid is formed not out of 6mm or 8mm acrylic, but of ultra-tough 10mm acrylic.  Multi-position Gebo stepless hinges are used in order to provide maximum flexibility for the user.

Less fuss for installers
Whereas some comparable portlights come in kit form, with many pieces to install and fiddly trims to cut to size, EconoLine Portlights feature the Gebo unique clamp system for the fastest, neatest finish.  Each EconoLine Portlight is supplied with an aperture template to aid fitting.  Gebo's unique clamp system eliminates the need for hole drilling.  For a perfect fit you simply screw the inner rim onto the back of the outer frame from the inside.

Fixed Gebo Econoline portlights are CE Approved for Category A, Areas 1, 2, 3 & 4.

Opening Gebo Econoline portlights are CE Approved for Category A, Areas 2, 3 & 4.

Lewmar stainless portlight dimensions

Gebo - Econoline portlights (rectangular ended)

Size Style Overall size Cut-out size
Width
(X)
Height
(Y)
Radius
(R)
Width
(X 1)
Height
(Y 1)
Radius
(R)
304 x 155 Fixed/Opening 329mm 180mm 68mm 304mm 155mm 56mm
347 x 171 Fixed/Opening 372mm 196mm 68mm 347mm 171mm 56mm
347 x 251 Opening only 372mm 276mm 68mm 347mm 251mm 56mm
375 x 175 Opening only 400mm 200mm 68mm 375mm 175mm 56mm
405 x 155 Fixed/Opening 430mm 180mm 68mm 405mm 155mm 56mm
429 x 171 Fixed/Opening 454mm 196mm 68mm 429mm 171mm 56mm
627 x 171 Fixed/Opening 652mm 196mm 68mm 627mm 171mm 56mm
676 x 171 Opening only 701mm 192mm 68mm 676mm 171mm 56mm
676 x 191 Opening only 701mm 216mm 68mm 676mm 191mm 56mm

Each Gebo Econoline portlight is supplied with an aperture template to aid fitting.  Gebo's unique clamp system eliminates the need for hole drilling.  For a perfect fit you simply screw the inner rim onto the back of the outer frame from the inside.

Portlights should be fitted to a flat surface with a maximum tolerance of 1mm.

Gebo clamp system EconoLine portlights are suitable for wall thicknesses of between 4 and 20mm.

The EconoLine design is recommended for building in the deck, coachroof, cockpit and transom.  For applications in the hull, please use the Gebo Standard (rectangular and circular ended) portlights.

CE Regulations Explained

The letters CE (Conformité Européenne) appear on many products that are traded on the single market in the European Economic Area (EEA).

The CE marking is required for many products. It:

  • shows that the manufacturer has checked that these products meet EU safety, health or environmental requirements
  • is an indicator of a product’s compliance with EU legislation
  • allows the free movement of products within the European market

By placing the CE marking on a product a manufacturer is declaring, on his sole responsibility, conformity with all of the legal requirements to achieve CE marking. The manufacturer is thus ensuring validity for that product to be sold throughout the EEA. This also applies to products made in third countries which are sold in the EEA and Turkey.

The CE Regulations apply to craft up to 24m in length that are sold in the European Union. Although the regulations may not apply to your boat, they are a useful guide for small craft throughout the world.

The regulations have Design Categories for boats based on their intended use and propulsion (sail or power). They are as follows -

A. OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4m and above and vessels largely self-sufficient.

B. OFFSHORE: Designed for offshore voyages where conditions up to and including wind force 8 and significant wave heights up to and including 4m may be experienced.

C. INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to and including wind force 6 and significant wave heights up to and including 2m may be experienced.

D. SHELTERED WATERS: Designed for voyages on small lakes rivers and canals where conditions up to and including wind force 4 and significant wave heights up to and including 0,5m may be experienced.

The Regulations divide up the boats hull and deck into four specific Areas. A product, which is suitable for fitting to an area for which it is approved, is suitable for all the areas below its category. For example, a portlight, which is approved for Area 2 may also be fitted to Areas 3 and 4, but not Area 1.

CE Area diagrams courtesy of Lewmar Hatch and Portlight fitting guide.

Be the first to Write a Review for this item!

Related products
Lewmar - Standard Portlight

Lewmar - Standard Portlight Part No. 393020200From:  £129.95  (3)

Gebo - Standard portlights (rectangular)

Gebo - Standard portlights (rectangular) Part No. 81.20.11.00From:  £169.00

Gebo - Standard Deck Hatches

Gebo - Standard Deck Hatches Part No. 80.20.10.00From:  £189.00  (1)

Gebo - 500 x 500mm (Houdini Replacement) Hatch

Gebo - 500 x 500mm (Houdini Replacement) Hatch Part No. 80.50.01.29£423.00   £297.95  (7)

Gebo - Standard portlights (circular ended)

Gebo - Standard portlights (circular ended) Part No. 81.20.21.05From:  £259.00

Lewmar - Atlantic Portlight

Lewmar - Atlantic Portlight Part No. 39110090From:  £278.00

  

Click For details

 

 

 Search :