Stock Request
*
Quantity Required:
Article Number:
*
E-mail Address:

Can't find a product?
*
Just ask:
*
Contact email:

Recently Viewed

Lewmar - Low Profile Hatch

Lewmar

Sleekly designed Lewmar Low Profile Hatches are ideal for use on powerboats or small sailing craft.  The larger sizes can be used as foredeck hatches on smaller to mid size yachts.  Lewmar hatches feature their unique sealing system allowing easy acrylic replacement.  All sizes certified for CE Category A, Areas 2, 3 & 4.

Price:  £199.95
RRP:  £252.00
Save:  £52.05 (21%)
(Inc. VAT @ 20%)
+
Low Profile:  
Lid type:  

Article Number:  39900030

ARBO - Arbokol 1000 Polysulphide SealantARBO - Arbokol 1000 Polysulphide Sealant
Oceanair - SKYSHADE CabinshadeOceanair - SKYSHADE Cabinshade
Blue Performance - Hatch CoversBlue Performance - Hatch Covers
  (2 Reviews)

Lewmar - Low profile hatches

Size Style Overall size Cut-out size*
Width
(X)
Height
(Y)
Depth
(Z)
Radius
(R)
Width
(X 1)
Height
(Y 1)
Radius
(R 1)
00 Square 281mm 281mm 25mm 72.5mm 211mm 211mm 42.5mm
03 Rectangular 301mm 246mm 25mm 72.5mm 231mm 176mm 42.5mm
10 Square 330mm 330mm 25mm 72.5mm 260mm 260mm 42.5mm
18 Circular 490mm Ø 25mm n/a 420mm Ø n/a
20 Rectangular 417mm 272mm 25mm 72.5mm 347mm 202mm 42.5mm
22 Circular 588mm Ø 25mm n/a 518mm Ø n/a
30 Rectangular 527mm 397mm 25mm 72.5mm 457mm 327mm 42.5mm
40 Square 491mm 491mm 25mm 72.5mm 421mm 421mm 42.5mm
41 Rectangular 491mm 246mm 25mm 72.5mm 421mm 176mm 42.5mm
44 Square 512mm 512mm 25mm 72.5mm 442mm 442mm 42.5mm
50 Rectangular 577mm 447mm 25mm 72.5mm 507mm 377mm 42.5mm
51 'D' hatch 588mm 448mm 25mm 72.5mm 518mm 378mm 42.5mm
54 Rectangular 577mm 467mm 25mm 72.5mm 507mm 392mm 42.5mm
60 Square 577mm 577mm 25mm 72.5mm 507mm 507mm 42.5mm
64 'D' hatch 500mm 600mm 25mm 72.5mm 430mm 530mm 42.5mm
65 Trapezoid Contact us for details 25mm Contact us for details

* Cut-Out sizes will change with Trim Kits are used.

  • Hatches should be fitted to a flat surface with a maximum tolerance of ± 1mm
  • Fastening size for lower frame sections use 5mm CSK screws No. 10 UNC 2BA
  • Fastening size at the hinge section use M6 (¼") screws
  • All hatches have a 'Lower Frame Flange' of 15mm

Lewmar Hatch & Portlight Fitting Guide (PDF)

CE Regulations Explained

The letters CE (Conformité Européenne) appear on many products that are traded on the single market in the European Economic Area (EEA).

The CE marking is required for many products. It:

  • shows that the manufacturer has checked that these products meet EU safety, health or environmental requirements
  • is an indicator of a product’s compliance with EU legislation
  • allows the free movement of products within the European market

By placing the CE marking on a product a manufacturer is declaring, on his sole responsibility, conformity with all of the legal requirements to achieve CE marking. The manufacturer is thus ensuring validity for that product to be sold throughout the EEA. This also applies to products made in third countries which are sold in the EEA and Turkey.

The CE Regulations apply to craft up to 24m in length that are sold in the European Union. Although the regulations may not apply to your boat, they are a useful guide for small craft throughout the world.

The regulations have Design Categories for boats based on their intended use and propulsion (sail or power). They are as follows -

A. OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4m and above and vessels largely self-sufficient.

B. OFFSHORE: Designed for offshore voyages where conditions up to and including wind force 8 and significant wave heights up to and including 4m may be experienced.

C. INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to and including wind force 6 and significant wave heights up to and including 2m may be experienced.

D. SHELTERED WATERS: Designed for voyages on small lakes rivers and canals where conditions up to and including wind force 4 and significant wave heights up to and including 0,5m may be experienced.

The Regulations divide up the boats hull and deck into four specific Areas. A product, which is suitable for fitting to an area for which it is approved, is suitable for all the areas below its category. For example, a portlight, which is approved for Area 2 may also be fitted to Areas 3 and 4, but not Area 1.

CE Area diagrams courtesy of Lewmar Hatch and Portlight fitting guide.
Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
Excellent service
Wednesday, 16 August 2017  | 

Excellent service from SeaTeach with delivery arriving the morning after I had placed an order the previous afternoon.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
new for old
Saturday, 31 December 2016  | 

We had to replace the front hatch on our 26 year old Laser 28 and could not longer purchase the same. However the Lewmar Low Profile fitted the old hole perfectly. Simple to install and very easy to operate. Full marks

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

Related products
ARBO - Arbokol 1000 Polysulphide Sealant

ARBO - Arbokol 1000 Polysulphide Sealant £15.95  (1)

Oceanair - SKYSHADE Cabinshade

Oceanair - SKYSHADE Cabinshade Part No. OCSH-1-B-RPFrom:  £43.00  (3)

Blue Performance - Hatch Covers

Blue Performance - Hatch Covers Part No. BP801From:  £24.50  (3)

Sika - Sikaflex 291i General Purpose Sealant/Adhesive

Sika - Sikaflex 291i General Purpose Sealant/Adhesive From:  £8.50

PSP - Vinyl Bear foam tape

PSP - Vinyl Bear foam tape Part No. ps-1700-BKFrom:  £4.10

   

Click For details

 

 

 Search :