SeaSmart - Marine Toilet Sanitiser

SeaSmart - Marine Toilet Sanitiser

  (1 Review)

£169.99    (Inc. UK VAT @ 20%)RRP:  £178.80Save:  £8.81 (5%)(£141.66 Exc. VAT)

We're currently unable to show live stock information on our website, so if you need delivery fast we strongly recommend checking availability first. Simply fill out the form below and we'll get back to you, or call us on +44 (0)1243 375774 for an immediate answer.

Please add the two numbers

Average Rating (1 Review):  
Write a Review and share your opinions!

Does what it says on the tin
28 August 2017  | 

We had Seasmart installed three years ago and it has done what it real smells in the heads. It wasn't bad after a three month lay off due to illness. My grand daughters said nothing after their trip yesterday, and if they can complain they will.

Was this helpful to you?  Yes  /  No

3 of 3 people found this review helpful.

Product Information

Seasmart solves the problem in a unique way. It contains a reservoir of eco-friendly disinfectant, a microprocessor which analyses toilet use, and a dosing pump to dispense the disinfectant through a very thin tube threaded through the inlet sanitation hose.

The disinfectant is dispensed directly into the flushing water, at the seacock, right at the start of its journey into the marine toilet. In this way, ALL of the water in the system is disinfected and sanitized, right from the start of the system.

A total solution, SeaSmart is a self-contained, independent system controlled by an intelligent micro-processor that runs on its own power supply.

It analyses usage to dispense exactly the right amount of disinfectant through the whole toilet system whether you’re on a long voyage or short trip. It even works when you’re not on the boat!

SeaSmart Toilet Sanitiser Features

  • Automatically sanitizes and deodorises your toilet system.
  • Intelligently monitors and dispenses according to usage.
  • Environmentally friendly & easy to refill
  • Suits almost all types of manual or electric heads.
  • For leisure and small work craft of all types.
  • Even works while you're not on the boat.
  • Reduces need to change sanitation hose.
  • Easily installed & cost effective.

SeaSmart Toilet Sanitiser Installation

Toilets flushing with sea or river water (Manual or Electric)

Installation is straightforward, just two tiny screws secure the SeaSmart, then you disconnect your inlet hose, connect your SeaSmart, thread the very thin disinfectant tube down inside the inlet sanitatation hose to the seacock and reconnect your sanitation hose. Full instructions come with your SeaSmart.

Inspect your toilet to find a good place to install the SeaSmart. Usually this should be on a bulkhead or cabin cladding adjacent to the toilet bowl. The footprint of SeaSmart is just 26cm (10”) high by 11.6cm (4½”) wide

Your SeaSmart needs to be within 40 cm or 16 inches of the flush water inlet hose to the pump, so that the connection tube will reach. If you have to install it further away (very unusual for manual toilets), we can supply SeaSmarts with longer connection tubes to order.

If you have an electric flush pump that’s not located by the toilet, it's best to install your SeaSmart by the remote electric pump.

You can also install your SeaSmart anywhere the inlet sanitation hose is accessible between the seacock and the flush pump. You will need a straight connector which we can supply.

Blakes Lavac Toilets (Manual or Electric)

Installation is the same as above but you connect to the flush water inlet to the pan, or anywhere the inlet hose is accessible.

1 x 9v battery included, 1 x sanitiser refill included

       +44 1243 375774

  My Account        Total: £0.00